R-CFS+KERII Hybrid resin with Threaded Rods

High strength and versatile application in cracked and non-cracked concrete with threaded rods.

Approved for use with threaded rods in cracked and non-cracked concrete
Suitable for use in dry or wet substrates and water filled holes
For faster curing winter version of the resin can be used
No need for hole cleaning when using Dustlessdrill bit
Special nozzle with longer mixer for more comfortable and precise application
Suitable for multiple use. Partly used product can be reused after fitting new nozzle
Very high load capacity
Unique soft foil pack for less waste
Effortless extrusion due to the patented self-opening system with manual or battery dispenser guns
Tests in fire conditions confirm the fire resistance up to R120

Drill hole to the required diameter and depth for stud size being used.
Clean the hole thoroughly with brush and hand pump at least four times before installation.
Insert cartridge into gun and attach nozzle.
Dispense to waste until even colour is obtained (min. 10 cm).
Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Attach fixture and tighten the nut to the required torque.